Struggle to find a way to modern IT? Cloud, DevOps, SRE, Serverless and many more terms are everywhere today and most likely will not disappear anywhere soon. So get a good starting point is really important. Who are you? Ask yourself what kind of person you are and pick your way. Afraid of all the new thinks I created a small workshop where you get get your hands dirty and learn all the terms hands on.

Why should i care about it If you are a developer or an UX designer wanting to build a public website dealing with data and users and don’t want to learn all trillion tech’s needed for. Or you are just sick of writing boiler plate code. Goal Have a simple data structure that allows via a Website to CRUD (Create, Read, update and delete) items in a visually not to ugly way and secure everything with a user management.

How to NOT get started Buy a turbine jet that goes more than 300 km/h and cost more than your car - because you will destroy it!!! How to get started Do not start with a cool fighter jet - you will destroy it!!! Get something simple to fly Tiny indoor drone (with prop protection) Stabilized camera drone (with prop protection) A Trainer airplane (with recovery function or dihedral) Get a simulator and use it for some time Areas of the hobby Planes Glider (with or without motor) High wing (trainer / STOL) Mid wing (3d) Low wing (warbirds) Wing Helicopters Scale 3D Drones Camera (typical DJI) Cinematic (mix off freestyle and camera) Freestyle / Racing FPV (First Person View) Race / Freestyle / Long range / Mission Building your own Foamboard / Depron Balsawood Tech Challenge Is this something you can imagine to get into?

After some playing around with a pringles pipe as a shed i decided to upgrade to a 3d printed one. Research Ok, calling it a research might be total overkill, but I googled for some pictures and found some nice modern sheds as a baseline. Design Started with some flat walls that soon got upgraded corrugated iron look and some windows adding a flat roof that got extended by some roof openings printed the parts and noticed putting them together is hard if you don’t have a base to put them on created a base with some guidelines for the walls cared out of it added some doors (with just some tape acting as a hinge and spring at the same time) placed a locomotive on a track and drove in : party ;) Get some details Added a walkway to place later on some figures inside designed some window frames and glued some transparent plastic waste behind it.

Why another page about model railroads? When it comes to model railroads, you soon stumble over lots of new terms you have most likely never heard before. And when you start googeling for them you either get answers with more terms you don’t understand or a product that is quite expense. What you find here (hopefully) I was starting out with a starter kit from Märklin and soon noticed - i want to control stuff not only by hand or the Mobile Station 2.

To know or not to know … As i’m looking quite often in new (tech) topics, i would like to share some of my learnings with you and also persist the stuff i learned a little bit. What to find here Most likely not too much - as documentation is not always the first thinks people like todo ;)